We use cookies to operate this website and to improve its usability. By using this website, you agree that cookies are stored on your device.
FAQ
It can happen that the big bag is still swinging slightly on lowering so that the FLEDBAG® can easily tip on penetrating the bag. The moving handle gives in, and nothing breaks.
Enormous forces act on the FLEDBAG®; this is why a flat, stable position is so important. The connecting screw between the emptier and the slide is recessed so that the FLEDBAG® can be set up evenly on the ground.
The FLEDBAG® Original is designed exclusively for the use of one-way big bags, as the big bag is broken after removing the FLEDBAG®. Of course, the FLEDBAG® Original can also be used for returnable big bags, but the big bag is broken after this use. You also need to consider the fact that the FLEDBAG® Original is inserted off centre, and not directly at the returnable big bag’s outlet. We recommend the use of the FLEDBAG® Easy for returnable big bags; this system does not damage the big bag, which can then be re-used.
After using the FLEDBAG®, cut it out of the big bag. Of course, you can leave the FLEDBAG® Original in the big bag for storage purposes, and deposit the big bag.
Release the connecting clamp; you can then easily remove the FLEDBAG® Easy. This means that you can re-use the returnable big bag.
Yes, you can leave the FLEDBAG® in the big bag, and then deposit the big bag for storage purposes.
Depending on the big bag’s content, a small remnant may remain in the big bag; this can be fully emptied after removing the FLEDBAG®.
The FLEDBAG® Original and the FLEDBAG® Easy have an unlimited service life given intended use. It is important for the big bag’s content not to contain lumps.
The FLEDBAG® Original and the FLEDBAG® Easy can be used for pourable materials from 1 to approx. 20mm in diameter. The FLEDBAG® Easy is also suitable for powdered material.