FAQ

It can happen that the big bag is still swinging slightly on lowering so that the FLEDBAG® can easily tip on penetrating the bag. The moving handle gives in, and nothing breaks.

Enormous forces act on the FLEDBAG®; this is why a flat, stable position is so important. The connecting screw between the emptier and the slide is recessed so that the FLEDBAG® can be set up evenly on the ground.

The FLEDBAG® Original is designed exclusively for the use of one-way big bags, as the big bag is broken after removing the FLEDBAG®. Of course, the FLEDBAG® Original can also be used for returnable big bags, but the big bag is broken after this use. You also need to consider the fact that the FLEDBAG® Original is inserted off centre, and not directly at the returnable big bag’s outlet. We recommend the use of the FLEDBAG® Easy for returnable big bags; this system does not damage the big bag, which can then be re-used.

After using the FLEDBAG®, cut it out of the big bag. Of course, you can leave the FLEDBAG® Original in the big bag for storage purposes, and deposit the big bag.

Release the connecting clamp; you can then easily remove the FLEDBAG® Easy. This means that you can re-use the returnable big bag.

Yes, you can leave the FLEDBAG® in the big bag, and then deposit the big bag for storage purposes.

Depending on the big bag’s content, a small remnant may remain in the big bag; this can be fully emptied after removing the FLEDBAG®.

The FLEDBAG® Original and the FLEDBAG® Easy have an unlimited service life given intended use. It is important for the big bag’s content not to contain lumps.

The FLEDBAG® Original and the FLEDBAG® Easy can be used for pourable materials from 1 to approx. 20mm in diameter. The FLEDBAG® Easy is also suitable for powdered material.

Copyright © 2021 OMP Trade GmbH. All rights reserved.